JSA template · ground-floor interiors

Painting JSA template Australia

Ground-floor interior painting from a platform under 2 metres is not high-risk construction work. A Job Safety Analysis is the right written assessment — solvents, dust, other trades, not a fall from the eave. The moment this job becomes first-floor eaves or a roof, stop using a JSA as the legal document.

Generate a painting JSASee live demo

When a painting JSA is enough

Not HRCW: ground-floor walls and ceilings from a platform under 2 m. Hazards are real — silica from compound, solvent enamel, other trades — they just aren’t Schedule 3 by themselves.

This is not the occupied Hawthorn terrace on the filled JSA example page. That job has possible lead on original plaster. This one is a new townhouse in Coomera, still curing compound, tilers in the wet areas next door.

First-floor eaves, a void, or a roof: working at heights SWMS. A JSA is not a legal substitute.

Filled example: new-build interiors, Coomera QLD

Open-plan living and hallway, ground floor only. First coat on new plasterboard. Water-based walls, no solvent enamel on this visit. Platform under 2 m. Other trades still in the dwelling.

Job / task
First coat — ground-floor living and hallway, new plasterboard
Site
New townhouse, Coomera QLD 4209
Document
JSA · not HRCW · example only
PPE
Hi-vis, steel-caps, glasses, P2 when sanding, hearing protection on the sander

Example layout — not a copy-paste legal document. Occupied lead terraces are a different JSA (see the Hawthorn blog example). Eaves over 2 m need a heights SWMS, not this JSA.

StepHazardsControls5×5 risk
1. Sign in with the builder, mask new plaster, keep a clear path for other trades
Responsible: Leading hand
  • Tilers and cabinetmakers using the same hallway
  • Slips on plastic and curing compound dust
  • Uncapped services still being fitted in the kitchen
  • Toolbox with the leading hand next door; don’t block the wet-area access
  • Tape drop sheets at the edges; vacuum, don’t dry-sweep compound dust
  • Stay out of rooms with open electrical or plumbing until they’re closed
InitialL3×C3 = 9 Medium
ResidualL2×C2 = 4 Low
2. Spot-fill and sand walls and ceiling from the floor and a platform under 2 m
Responsible: Painter
  • Inhalable plaster / silica-containing compound dust
  • Noise and vibration from the sander
  • Overreaching from a makeshift stool
  • On-tool extraction; P2; no dry sanding without extraction in a closed room
  • Hearing protection while the sander is running
  • Stable platform with lockable wheels — not a bucket or the stair stringer
InitialL4×C3 = 12 High
ResidualL2×C3 = 6 Medium
3. Cut in ceilings and corners, then roll walls (water-based)
Responsible: Painter
  • Neck and shoulder strain on new high ceilings still under 2 m working height
  • Paint in the eyes
  • If someone “just nips up” a ladder onto the void — fall greater than 2 m
  • Short bursts on overhead cutting-in; swap tasks
  • Glasses; lids on tins
  • If the void or stair needs a working height with a fall over 2 m, stop — that is a heights SWMS, not this JSA
InitialL3×C3 = 9 Medium
ResidualL2×C2 = 4 Low
4. Clear the rooms for the tiler tomorrow; wash up water-based gear
Responsible: All workers
  • Trips on drop sheets and leftover tins
  • Wet paint on traffic paths
  • Manual handling of leftover drums to the van
  • Coil sheets as you go; stack tins against the wall, not in the doorway
  • Tape a wet-paint warning on the living entry
  • Two-person lift for full drums; park close to the garage
InitialL3×C2 = 6 Medium
ResidualL1×C2 = 2 Low

Frequently asked questions

Do I need a painting JSA template in Australia?

For ground-floor interiors under 2 m, a JSA is the usual written risk assessment principals ask for. It is not legally prescribed the way a SWMS is. First-floor eaves, a stair void, or any fall greater than 2 m needs a SWMS instead.

Is there a free painting JSA download?

Generate in the trial and download the PDF, no card. This Coomera new-build example is a layout. Don’t sign it for a lead terrace in Melbourne.

Do painters need a SWMS or a JSA?

Under 2 m on the ground floor: JSA. Fall greater than 2 m (eaves, voids, roofs): SWMS. A JSA is not a legal substitute on high-risk construction work.

Is this JSA valid in NSW, VIC, QLD and WA?

You can generate for each state. NSW, QLD and WA cite the WHS Act/Regulation. Victoria cites the Occupational Health and Safety Act 2004 and Occupational Health and Safety Regulations 2017. There is still no prescribed JSA format — the state line is for honest citations, not a magic stamp.

How is this different from the Hawthorn painting example?

The blog JSA example is an occupied Victorian terrace in Hawthorn with possible lead. This page is a new-build townhouse in Coomera — plaster dust, other trades, water-based coatings, no lead story. Same trade, different job.

Generate a painting JSA for this interior

Rooms, coatings and the state. Free trial, no credit card. Not a SWMS for eaves.

Start free trial